30 open-source projects similar to timdorr/tesla-api, ranked by shared indexed features. Tags may describe platforms or build tools rather than the same primary purpose. Check each project’s use case, license, and deployment requirements before treating it as a replacement.
Python library to interact with FLIR camera cores
The official pylon ROS driver for Basler GigE Vision and USB3 Vision cameras:
Python package that implements communication and configuration of the Tau Lidar Camera
Cross-platform library to communicate with LiDAR devices of the Blickfeld GmbH.
Johnny-Five is a JavaScript robotics framework and microcontroller hardware interface designed for programming robots and IoT devices. It provides a standardized library for managing pins, motors, and displays across various microcontroller platforms, allowing developers to control sensors and actuators using a consistent JavaScript API. The framework is distinguished by its use of a plugin-based hardware abstraction system, which enables communication with diverse hardware platforms and protocols. It supports real-time hardware manipulation and debugging through a read-eval-print loop that a
Embedded-hal is a hardware abstraction layer for embedded microcontrollers that defines common traits allowing peripheral drivers to remain entirely independent of specific hardware platforms. The library provides platform-agnostic interfaces that decouple driver logic from microcontroller architectures, utilizing zero-cost trait abstractions that compile down to direct hardware register manipulations without runtime overhead or memory allocation. The project features asynchronous execution support and synchronous-to-asynchronous adaptation, enabling non-blocking peripheral operations and coo
mujoco_menagerie is a curated library of physical robot specifications and XML model definitions designed for standardized dynamics and contact simulation. It provides a collection of high-quality robot model files for humanoids, quadrupeds, and manipulators, alongside detailed kinematic and inertial parameters used to reproduce real-world robot behavior in virtual environments. The project serves as a repository of robotics simulation assets and MJCF model definitions optimized for accuracy. It includes standardized model libraries specifically for bipedal, quadrupedal, and humanoid hardware
This project provides a complete set of design files and hardware specifications for a 3D-printable industrial-style robot arm. The system includes a CAN bus robot controller for managing stepper motors and sensors, a kinematics engine for calculating joint angles and poses, and a UDP-based Python API for sending motion commands and monitoring telemetry. The system features a force-controlled robotic gripper that utilizes field-oriented control on stepper motors to enable compliant grasping and precise force sensing. It also includes a 3D position visualization tool for real-time telemetry tr
MicroPython driver for DS1307 RTC
SFUD 是一款开源的串行 SPI Flash 通用驱动库。由于现有市面的串行 Flash 种类居多,各个 Flash 的规格及命令存在差异, SFUD 就是为了解决这些 Flash 的差异现状而设计,让我们的产品能够支持不同品牌及规格的 Flash,提高了涉及到 Flash 功能的软件的可重用性及可扩展性,同时也可以规避 Flash 缺货或停产给产品所带来的风险。
A driver crate for the entire u-blox cellular family in Rust
Utility for decoding an R/C receiver PPM frame signal. This code was based on this article.
This MicroPython driver is for TTP229-BSF capacitive keypad on ESP8266/ESP32. Tested on both ESP8266 (WeMos D1 mini) and ESP32 (BPI:bit) with v1.11 firmware.
Waveshare E-Paper Display driver for devices running Pycom-flavored MicroPython
WIP Platform agnostic Rust driver for the Sensirion SHT2x temperature/humidity sensors.
Platform-agnostic no_std Rust driver for the TI TMAG5273 3-axis Hall-effect sensor
e-Ink library for Waveshare 4.3inch device on MicroPython
Platform agnostic Rust driver for the Sitronix ST7032i Dot Matrix LCD Controller.
flock2 can fly a swarm of DJI Tello drones. flock2 is built on top of ROS2, fiducialvlam, and telloros.