10 open-source projects similar to infinite-tree/micropython-encoder-knob, ranked by shared indexed features. Tags may describe platforms or build tools rather than the same primary purpose. Check each project’s use case, license, and deployment requirements before treating it as a replacement.
EncoderLib is a library to handle a rotary encoder in MicroPython
This is the code to go with our new youTube video eplaining line by line how to communicate with a rotary encoder.
This is a MicroPython library for the M5 8-Encoder.
A MicroPython driver to read a rotary encoder. Works with Pyboard, Raspberry Pi Pico, ESP8266, and ESP32 development boards. This is a robust implementation providing effective debouncing of encoder contacts. It uses two GPIO pins configured to trigger interrupts, following Ben Buxton's…
AS5600, в дальнейшем энкодер, это простой в программировании магнитный датчик положения с 12-битным аналоговым или ШИМ-выходом высокого разрешения. Эта бесконтактная система измеряет абсолютный угол диаметрально намагниченного осевого магнита. Энкодер предназначен для применения в бесконтактных…
CPython supports asynchronous programming via the asyncio library. MicroPython provides asyncio which is a subset of this, optimised for small code size and high performance on bare metal targets. This repository provides documentation, tutorial material and code to aid in its effective use.
The first part of this repo contains assorted code ideas for MicroPython. Many are targeted at Pyboard variants. Some are intended as pointers to programmers rather than being complete. Egregious bugs will be fixed but I may not accept feature requests.
MicroPython Driver for Quiic Twist RGB Rotary Encoder (tested with ESP32 and Raspberry Pi Pico)
The AS5600 is an angle sensor, based on detecting the rotation of a magnet by the Hall effect. The resolution is 12 bits thus it can divide a complete rotation into 2^12 or 4096 parts. The device is configured and read by I2C. This library can read all registers on the AS5600 and can write to…
This is a simple menu system written in micropython. It uses a switch, a rotary encoder and an OLED display. It was developed on a Raspberry Pi Pico but also runs on an ESP32 and ESP8266.